NPA100DA
USER MANUAL
www.blustream.com.au
|
www.blustream-us.com
|
www.blustream.co.uk
08
Advanced Dante® Settings
It is possible to change various Dante® related settings of the NPA100DA under the “Device Info” screen in the Dante®
Controller software. To do so, select the “Device Config” menu.
Here it is possible to adjust the sample rate of the NPA100DA.
Please note:
that Dante® products can only transmit
or receive audio from other Dante® products that are set up with the same sample rate. A mismatch in sample rate
may stop audio from transmitting.
Under the “Device Config” screen the latency of the NPA100DA can be configured with 1, 2 or 5 milliseconds delay.
By default, the NPA100DA is shipped with the network settings set to obtain an IP Address automatically. This
means that if a DHCP server is present on the network, the NPA100DA will be provided with an IP Address. If
no DHCP server is present then the NPA100DA will receive a default IP Address in the 169.254.xxx.xxx range. To
change the IP Address of the NPA100DA, enter the “Network Config” menu in the “Device Info” screen of the Dante®
Controller software:
Dante® Controller
