BluStream IP500UHD-TZ, Краткое руководство пользователя

Страница: 3 / 4

IP500UHD-TZ
QUICK REFERENCE GUIDE
03 Contact:
support@blustream.com.au
|
support@blustream-us.com
|
support@blustream.co.uk
IP500UHD-TZ Transmitter / Receiver Mode Configuration
All IP500UHD-TZ Transceivers are configured by default into Transmitter / Encoder mode. To toggle between
Transmitter / Encoder and Receiver / Decoder mode, press and hold the MODE button on the front panel of the unit
for 10 seconds. After the unit reboots, the OLED display will then show the product has switched to Receiver / Decoder
mode. The mode can also be configured via the ACM500. Please see the ACM500 User Manual, downloadable from the
Blustream website, for more information on how to complete this.
The IP500UHD-TZ OLED display will show different information, or menu system, depending on what mode is selected.
The display will turn off after 30 seconds of inactivity. The table below outlines all of the configuration settings:
Transmitter / Encoder Mode Receiver / Decoder Mode
Front Display:
1st line shows TX name (does not scroll), eg:
• TX: Transmitter 001
2nd line scrolls through TX IP and TX ID every 5 seconds, eg:
• TX: IP 169.254.3.1 • TX: ID 001
Front Display:
1st line scrolls through RX Name, RX ID, and RX IP every 5
seconds, eg:
• RX: Receiver 001 • RX: ID 001 • RX: IP 169.254.6.1
2nd line scrolls through the TX information being viewed: TX
Name, TX ID, and TX IP every 5 seconds, eg:
• TX: Transmitter 001 • TX: ID 001 • TX: IP 169.254.3.1
Press and hold UP and DOWN buttons for 5 seconds to enter the Local Config menu
Local Config:
• Transmitter ID
This will set the Transmitter ID as well as its related IP addresses
eg: if ID is set to 004, new IP and SSIP addresses will be
169.254.3.4 and 169.254.103.4 respectively.
Local Config:
• Receiver ID
This will set the Receiver ID as well as its related IP addresses eg:
if ID is set to 003, new IP and SSIP addresses will be 169.254.6.3
and 169.254.106.3 respectively.
Press and hold UP and DOWN buttons for 5 seconds to confirm the new ID
Press and hold UP button for 5 seconds to enter the TX or RX Config sub menu
TX Sub Menu Config:
• Audio • F/W Info • SFP Info
• IP Info • EDID
RX Sub Menu Config:
• Scaler • F/W Info • SFP Info
• IP Info • Viewing Mode • Max Channel
Use Up and DOWN buttons to highlight the item to be selected
Press and hold UP and DOWN buttons for 5 seconds to enter the sub menu
F/W Info:
• SDVoE: 1.2.0.2 • GUI: 1.10.04
• MCU: 1.10.20 • Back
F/W Info:
• SDVoE: 1.2.0.2 • GUI: 1.10.04
• MCU: 1.10.20 • Back
SFP Info:
• MAC: 6CDFFB000203 • Gateway: 169.254.100.1
• Subnet: 255.255.0.0 • 169.254.103.1
• Back
SFP Info:
• MAC: 6CDFFB000203 • Gateway: 169.254.100.1
• Subnet: 255.255.0.0 • 169.254.106.1
• Back
IP Info:
• MAC: 6CDFFB000202 • Gateway: 169.254.100.1
• Subnet: 255.255.0.0 • IP: 169.254.3.1
• Back
IP Info:
• MAC: 6CDFFB000202 • Gateway: 169.254.100.1
• Subnet: 255.255.0.0 • IP: 169.254.3.1
• Back
EDID:
• 00: 1080p 2ch • 01: 1080p 5.1ch
• 02: 1080p 7.1ch • 03: 1080i 2ch
• 04: 1080i 5.1ch • 05: 1080i 7.1ch
• 06: 1080p 3D 2ch • 07: 1080p 3D 5.1ch
• 08: 1080p 3D 7.1ch • 09: 4k30 444 2ch
• 10: 4k30 444 5.1ch • 11: 4k30 444 7.1ch
• 12: 4k60 420 2ch • 13: 4k30 420.1ch
• 14: 4k30 420 7.1ch • 15: 4k60 444 2ch
• 16: 4k60 444 5.1ch • 17: 4k60 444 7.1ch
• 18: 4k60 444 2ch HDR • 19: 4k60 444 5.1ch HDR
• 20: 4k60 444 7.1ch HDR • Back
Scaler:
• 00: Passthrough • 01: 720x480@60 4:3
• 02: 720x480@60 16:9 • 03: 720x576@50 4:3
• 04: 720x576@50 16:9 • 05: 1280x720@24
• 06: 1280x720@25 • 07: 1280x720@30
• 08: 1280x720@50 • 09: 1280x720@60
• 10: 1920x1080@24 • 11: 1920x1080@25
• 12: 1920x1080@30 • 13: 1920x1080@50
• 14: 1920x1080@60 • 15: 3840x2160@24
• 16: 3840x2160@25 • 17: 3840x2160@30
• 18: 3840x2160@50 • 19: 3840x2160@60
• 20: 4096x2160@24 • 21: 4096x2160@25
• 22: 4096x2160@30 • 23: 4096x2160@50
• 24: 4096x2160@60 • Back
Audio:
• Auto Audio • HDMI Audio
• Analogue Audio. • Back
Max Channel:
• MAX TX: 000 - x (where x is the max channels that an Rx can
scroll through, and 000 is the ablity to view all channels/TX's)
• Back
Viewing Mode
• 'MATRIX' or 'VIDEOWALL' or 'MULTIVIEW'
• Back
Settings menu will time out and return to main display after 20 seconds of inactivity