BluStream HMXL44AB, Руководство пользователя

Страница: 4 / 10

HMXL44AB USER MANUAL
04 www.blustream.co.uk
HEX70ED-Rx
Receiver
Rear Panel
HMXL44AB
HDMI 1
TCP/IP
IR Input IR Output
Input
ZONE
RS232
RS232 HDMI 2 HDMI 3 HDMI 4
HDBT
Output 1
HDMI HDBT
Output 2
HDMI HDBT
Output 3
HDMI HDBT
Output 4
HDMI
IR Ext.
POH DC24V
DC12V
POWER
1 2 3 4 1 2 3 4
1 2 3 4
L/R Output
1 2 3 4
DC24V
POH
1 2 3 12 10 13
1 2
11 9 8 8 8 8 7 7 7 7 6 5 4
1 IR inputs – 3.5mm stereo jack.
Transmits IR to the zone HDBaseT
receiver (displays). When using the
IRCAB cable (supplied) ensure cable
direction is correct.
2
IR outputs – 3.5mm mono
jack – Routed IR from HDBaseT
extender (room end). Use supplied
Blustream 5V IR emitters.
3
Zone specific bi-directional RS-232
ports – Connect to third party
control device to extend RS-232
commands to HDBaseT receivers
RS-232 port.
4
RJ45 – Connect to LAN for TCP &
GUI control
5 RS-232 port – For control of the
matrix switcher from PC or control
processer.
6 HDMI inputs – Connect to HDMI
sources.
7
HDBT output – Connect to HDBaseT
receivers.
8
HDMI output – Connect to HDMI
display. works simultaneously with
HDBaseT output.
9
IR input for matrix control – For
hard wired IR connection. Use
mono cable only. Connect to
control processor or Blustream 5v IR
receiver.
q POH power port – Use supplied 24v
DC adaptor to power the HDBaseT
extenders.
w Power port – Use supplied 12V DC
adaptor to power matrix.
e
L/R analogue audio output –
3.5mm stereo jack. Extracted audio
will follow the I/O selection. Please
note: input must be PCM 2ch
audio. Bitstream audio cannot be
decoded by matrix.
r GND – Connect to ground.
HEX70ED-RX
1
HDBaseT input
2 12V DC power (not
required)
3
2-way RS232
(9-pin serial)
4
HDMI output
5
IR Input 3.5mm stereo
jack
6
IR Output 3.5mm mono
jack
The HMXL44 Matrix is supplied with 4x HEX70ED-RX HDBaseT receivers
3 4 5 6