HMXL44-KIT V2
USER MANUAL
19
contact
[email protected] / [email protected]
Blustream PC Configuration Software
The Blustream HMXL44 V2 matrix unit can be configured using the Blustream matrix PC configuration software.
Please download the specific software and PC software manual at the following link:
http://www.blustream.co.uk/HMXL44V2
Blustream Web Browser Interface
The Blustream HMXL44 V2 matrix unit can be both controlled and configured using the in-built web-server.
The HMXL44 V2 Matrix must be connected to an active network router/switch and it is advised that the Matrix is
given a static IP address. You can configure the network settings of the Matrix using either the Web Browser Interface
(Blustream Matrix products are shipped with the network set to DHCP) or using the Blustream PC Configuration
Software (downloadable from the Blustream Drivers & Protocols link on the product web page).
For detailed instructions on using the Blustream Web Browser Interface please download the specific software
manual at the following link:
http://www.blustream.co.uk/HMXL44V2
