background image

HEX18GARC-KIT 

QUICK REFERENCE GUIDE

www.blustream.com.au 

|

 www.blustream-us.com 

|

 www.blustream.co.uk

HEX18GARC-KIT

Quick Reference Guide

The HEX18GARC-KIT extender set is an industry leading uncompressed, 

unconverted HDMI 2.0 4K 60Hz 4:4:4 HDCP 2.3/2.2 solution utilising the latest in 

HDBaseT™ technology. The HEX18GARC-KIT supports uncompressed distribution 

of the latest HDR resolutions including HDR10/10+ and Dolby Vision resulting in the 

ultimate in picture quality for your critical viewing areas. 
The HEX18GARC-KIT supports bi-directional IR, RS-232 and PoC up to lengths of 

100m over a single CAT6A cable. The HEX18GARC-KIT also provides enhanced 

features including KVM, ARC via HDMI or optical (S/PDIF) and Ethernet pass through.

Introduction

FEATURES:

•  Advanced uncompressed, unconverted, HDMI over HDBaseT™ technology offering distribution of bit for bit 4K HDMI 

video and audio over a single CAT6A cable

•  Supports HDMI2.0 18Gbps specification including 4K 60Hz 4:4:4 UHD video
•  Supports uncompressed distribution of the latest HDR resolutions including HDR10/10+ and Dolby Vision
•  Supports HDMI video distribution up to 100m*
•  Features 1x HDMI loop-out on HEX18GARC-TX for integrating local displays or cascading to multiple devices
•  Supports all industry standard video resolutions including VGA-WUXGA and 480i-4K
•  HDMI re-clocking on the HDBaseT™ Receiver to help solve HDMI HDCP, compatibility and handshaking issues 
•  Supports eARC (Enhanced Audio Return Channel) from display via HDMI and ARC via optical digital inputs
•  Supports audio return to HDMI, optical digital and analogue L/R audio outputs (analogue output supports 2ch PCM 

only)

•  Supports all known HDMI audio formats including Dolby Atmos, Dolby TrueHD, Dolby Digital Plus and DTS-HD 

Master Audio transmission

•  Features USB2.0 KVM with speeds up to 350Mbps
•  Bi-directional Ethernet (1Gb), IR & RS-232 pass through
•  Supplied with Blustream IR receiver and emitter
•  Bi-directional PoC (Power over Cable) to power extenders from either transmitter or receiver end
•  Support for HDCP 2.3, HDCP 2.2 and HDCP 1.4 

*Transmission distance is subject to video format, cable type and installation environment. It is recommended to use a minimum of CAT6A cabling

Содержание HEX18GARC-KIT








Отзывы: