BluStream Dante DA44AU, Руководство пользователя

Страница: 8 / 12

DA44AU
USER MANUAL
08 www.blustream.com.au / www.blustream.co.uk
RS-232 Control Port
Baud Rate:
57600 bps
Data Bit: 8-bit
Parity:
None
Stop Bit:
1-bit
Flow Control:
None
The DA44AU can be controlled via a 3-pin Phoenix to serial RS-232 cable.
The communication settings and commands are as follows:
RS-232 COMMAND DESCRIPTION
? Print Help Information
HELP
Print Help Information
STATUS Print System Status And Port Status
RESET Reset System To Default Setting
(Type “Yes” To Confirm, “No” To Discard)
PRESET xx APPLY Apply Preset xx
MUTE xx OUT yy Mute On/Off Output yy
xx= On or Off
yy=[00]: All Output Ports, [01...04]: Output Port
IN xx AUD yy zz Set Mic/Line Input And Sensitivity
xx=[00]: All Input Ports, [01...04]: Input Port
yy=MIC or LINE
zz=00: MIC: 00dB LINE: -10dB
zz=01: MIC: 05dB LINE: 00dB
zz=02: MIC: 10dB
zz=03: MIC: 15dB
zz=04: MIC: 25dB
zz=05: MIC: 35dB
IN xx PHA yy Set Input Phantom Power On/Off
xx=[00]: All Input Ports, [01...04]: Input Port
yy= ON or OFF
RS232BAUD z
Set RS232 Baud Rate To z
z = 1 2400, 2 4800, 3 9600, 4 19200, 5 38400, 6 57600 (default), 7 115200
NET DHCP ON/OFF Set Auto IP (DHCP) On Or Off
NET IP xxx.xxx.xxx.xxx Set IP Address
NET GW xxx.xxx.xxx.xxx Set Gateway Address
NET SM xxx.xxx.xxx.xxx Set Subnet Mask Address
NET RB Reboot Network And Apply Default Config