Blumfeldt 10034882, Руководство пользователя

Страница: 34 / 40

34
EN
13
Leak check
WARNING
Danger of fire or explosion, serious bodily injury of death
A leak test must be performed annually and each time a
cylinder is hooked up or if a part of the gas system is replaced.
Leak testing : This must be done before initial use, annually,and whenever any
gas Components are replaced or serviced. Do not smoke while performing
this test, and remove all sources of ignition. See Leak Testing Diagram for
areas to check. Turn all burner controls to the off position. Turn gas supply
valve on.
Brush a half-and-half solution of liquid soap and water onto all joints and
connections of the regulator, hose, manifolds and valves.
Bubbles will indicate a gas leak. Either tighten the loose joint or have the part
eplaced with one recommended by the Customer Care department and have
the patio heater inspected by a certified gas installer.
If the leak cannot be stopped, immediately shut off the gas supply, disconnect
it,and have the patio heater inspected by a certified gas installer or dealer. Do
not use the patio heater until the leak has been corrected.
Regulator / Cylinder
Hose / Regulator