These instructions should be used for Wellborn Cabinets
WDVC3030 and WDVC3630. (Page 2 of 6)
04/2008
without notice. © 2008
Adjustment
Subject to technical modifications
Finalizing the door adjustments
1. Adjust each top door hinge and
mounting plate to properly align the
top door to the cabinet.
2. Adjust each bottom door hinge and
mounting plate to properly align doors
to the cabinet and to the top door.
± 2 mm
± 2.5 mm
± 2 mm
± 2 mm
± 3 mm
+ 3/- 2 mm
1
2
Adjust tension of the mechanism
Use a screw gun and the supplied #2x2 POZI driver bit to adjust the lift
Close and flush doors to cabinet. Open and close door to test closing force.
mechanism to the desired tension. Test door again and repeat until desired
function is achieved.
Tension adjustment should be the same on both lift mechanisms.
2
1
Although not illustrated here, telescopic arm mounting plates can also be adjusted
horizontally ± 2 mm if needed.
