BLUM MINIPRESS, Инструкции по безопасности, инструкции по установке и информационный листок

Страница: 4 / 64

4
MINIPRESS top
Handling
Safety principle
➢ Please read the instruction leaflet and the safety information before start-up of the
assembly machine.
➢ We recommend that you use the reference diagrams to make it easier to identify
the parts being described.
The assembly machine complies with current safety standards. Nevertheless, there
will still be certain residual risks if the information contained in this instruction leaflet is
not observed.
Residual risk according to
EN ISO 12100:2010
Intended use
Foreseeable misuse
■ The assembly machine is equipped with all the necessary protection features.
■ However, there will still be some residual risks for the user, particularly when
removing the protective equipment or when control units fail.
■ Other residual risks are identified by warning signs and safety information.
It is therefore necessary to observe the safety information.
The designated purpose of the assembly machine is the drilling and insertion of furni-
ture fittings into work pieces made of wood, particle board or epoxy coated wood.
■ The assembly machine may only be operated by fully-trained personnel.
■ The assembly machine may only be used in skilled trade and industrial
applications.
■ It should only be installed in dry, enclosed rooms.
■ The assembly machine is only intended for stationary operation.
■ Only original Blum tools may be used.
■ No liability can be accepted for any other use.
■ Work piece size: vertical board thickness 45 mm
horizontal board thickness 40 mm
■ The MZK.224S (11 spindles) drilling head may only be used
with the supplied table extension.
■ No metal or aluminium frames may be drilled.
■ The MZK.2880 (17 spindles) drilling head may not be used.
■ Only use drilling heads with a safety shield.
Safety