BLUM MINIPRESS PRO, Руководство по эксплуатации

Страница: 14 / 40

14 BA-102/2EN M54.XXXX
2.1 - Description of operator panel
2 - Description of operator panel
2.1.1) Designation of operating elements
• (2.1) Main switch
• (2.2) Feed switch
• (2.3) Hold down clamp switch
• (2.4) Operating mode display indicator
ATTENTION:
The main switch (2.1) does not disconnect the assembly machine
from the air pressure system.
Pos.0: Operating mode indicator (2.4) does not light. Assembly machine in
set-up mode
- Motor cannot be started
- Stroke movement can be carried out
Pos.1: Operating mode indicator (2.4) lights. Assembly machine is in opera-
tional mode
- Drilling and the fitting insertion can be carried out
- The marking line lights
The main switch (2.1) can be secured against unauthorised drilling using a standard
padlock.
2.1.2) Feed switch (2.2)
ATTENTION:
When pressing the feed switch (2.2) , keep your hands away from the
work area (A) of the assembly machine.
Pressing the feed switch (2.2) will carry out the currently selected work
process.
Set up:
Set main switch (2.1) to Pos.0 + press feed switch (2.2)
Drill:
Set main switch (2.1) to Pos.1 + press feed switch (2.2)
Insert fitting:
Swivel in swing arm + press feed switch (2.2)
2.1.3) Hold down clamp switch (2.3)
Pos. Clamps on:
Pressing the feed switch (2.2) automatically engages the hold down clamps.
Briefly touching the hold down clamp switch (2.3) will disengage the clamps
(3.3) .
Pos. Clamps off:
Pressing and turning the clamp switch (2.3) to pos. will turn off the hold down
clamps. When the feed switch (2.2) is pressed, the hold down clamps (3.3)
remain engaged.
ATTENTION:
The main switch (2.1) should be set to pos. 0 when not in use to prolong
the life of the marking line.
2.1
2.4
2.3
2.2
2.1
2.2
2.3
+
+
+
2.1
2.2
2.3
3.8