7
Dimensions in millimeters
(inch equivalents as noted)
© 2021
Use #2x2 POZI bit
10
Finalize the tension adjustments
11
Finalizing the door adjustments
1. Adjust each top door hinge and
mounting plate to properly align the top
door to the cabinet.
2. Adjust each bottom door hinge and
mounting plate to properly align doors to
the cabinet and to the top door.
NOTE:
Although not illustrated here, telescopic arm mounting plates can also be adjusted
horizontally ± 2 mm if needed.
1
2
± 2 mm
± 2 mm
± 2.5 mm
± 2 mm
± 3 mm
+ 3/- 2 mm
Assembly
1
2
1. Close and flush doors to cabinet. Open
and close door to test closing force.
2. Open door and adjust tension screws on
both lift mechanisms with a power drill. Test
door again and repeat until desired function
is achieved.
Tension adjustment should be the same on both lift mechanisms.
