BluEye PRO, Руководство пользователя

Страница: 27 / 44

27
Charging the batteries
Before charging the drone make sure that the drone is turned off. Connect
the power supply to the charger and to an electrical socket. Make sure that
the charger switch is set to the drone symbol.
See page 7.
Do not turn the drone on while charging, it may damage
the drone and/or charger. When finished charging
remember to put the charging connector cap back on.
> 1,5 m/s
150 m
Open the connector lid on the surface
unit and connect an external USB
charger to the charging port (micro
USB). Make sure the USB output rating
is minimum 2.1 A. Use the other USB
output on the external USB charger to
charge the controller.
After all components are fully charged,
disconnect the plugs from the
electrical socket.
Place the drone on a robust and sta-
ble surface to remove any risk of the
drone falling over (preferably laying on
the side). Unscrew the charging cap
on the drone and connect the charger
to the charging port on the drone with
the included charging cable.