Bluewheel HX380, Руководство пользователя, Страница: 36 / 136

36
1. Place the hoverboard on a flat surface so that the wheels have no contact with the
ground.
2. Press the power button for 3-5 seconds until the brake lights flash.
3. Turn the hoverboard off and on again
Switch the device on using the power button. This is located at the back of the hover-
board. The indicator lights show the operational readiness.
5
4 4
TURN ON
RESET TO DEFAULT
OPERATING THE DEVICE
WARNING:
Danger of injury. Do not use our device if the battery power is less than
15 %. This will prevent damage to the battery and to your device. Please
immediately charge your battery fully.
We recommend that you charge your battery completely as a matter of
procedure.
What you need to know for the optimal operation of our device, you can read here.
You will get important information about how to best and easiest handle our device.
Please note: For your safety and a long service life of your device, it is important that
you observe these instructions at all times.