2. Heater - Pool Connections
These instructions assume that the pool and filter system are already assembled and
there is a hose attached to the pool return (pool water inlet).
Place the solar heater in a location where it will receive the greatest amount of sun
shine
and at least 9.8ft(3m) away from pool.
1) Heater - Filter Pump Connection
a. Turn off filter pump.
b. Block water flow at both the pool return inlet and the filter pump outlet to
prevent water from flowing through the hoses.
c. Detach the pool return hose from your filter system and set aside.
d. Depending on the orientation of your pump setup and desired heater
placement, choose one side to be the inlet and the other to be the outlet.
e. Locate long filter hose and attach between pump (the port where the pool
return hose was previously connected.) and the inlet using the hose clamps.
2) Heater –Pool Connections
Using a hose clamp, secure the loose end of your existing pool return hose to the
outlet of the heater.
Intex Special Adapter with
O-ring(2)& Flat Gasket(2)
Intex Special Adapter with
O-ring(2)& Flat Gasket(2)
4
