En
g
lis
h
BLUETREK SURFACE SOUND COMPACT I 8
Pairing the BLUETREK® SURFACE SOUND COMPACT
Before using the BLUETREK® SURFACE SOUND COMPACT, you must pair it with your
Bluetooth® mobile phone. Pairing is the process of linking 2 Bluetooth® devices, so that
they can communicate.
To initiate pairing:
1. Place the BLUETREK® SURFACE SOUND COMPACT and your mobile phone within 0.3
meter (1 foot) from each other.
2. Switch on your phone and select its Bluetooth® discover mode (refer to the Bluetooth®
mobile phone user manual).
3. When the BLUETREK® SURFACE SOUND COMPACT is switched on, press and hold both
the TALK button and the VOL+ button for about 5 seconds until the indicator light
flashes red and blue alternately. And a sound can be heard in the speaker.
4. Once the mobile phone detects the car kit, a “BLUETREK COMPACT” message will be
displayed. Follow the phone instructions to accept the pairing. The PIN code (or
passkey) is 0000, then press “yes” or “ok”.
If pairing was successful, the indicator light will switch to blue and flashes slowly.
If you haven’t started the discovery mode within 5 minutes, it will stop. In this case, you
must start the pairing again as step 3 above.
