Pairing the BLUETREK® ST1
Before using the headset, you must pair it with your Bluetooth® mobile phone. Pairing is the
process of linking two Bluetooth® devices, so that they can communicate.
Figure 3.
1. Place the headset and your mobile phone within 0.3 meters (1 foot) of each other.
2. Switch on your phone and select its Bluetooth® discover mode (refer to the Bluetooth®
mobile phone manual).
3. Ensure the headset is switched off.
4. Press and hold the “TALK/ON/OFF” button for about 7 seconds until the indicator light
flashes red and blue alternately, and a tone can be heard through the speaker.
5. Once the mobile phone detects the headset, a “BLUETREK ST1” message will be displayed.
Follow the phone instructions to accept the pairing. The PIN code (or passkey) is 0000,
then press “yes” or “ok”.
If the pairing is successful, then the “TALK/ON/OFF” button indicator light will turn into blue
and flashes intermittently.
7
1.
Switch on your mobile
Go into
“Settings/connectivity”
2.
Search to find
“ BLUETREK ST1”
3.
When found, enter
the passkey “0000”
4.
Select connect
1
1
En
gli
sh
5
