EN
EN
Riding the e-scooter
Preparation before riding
1. Find a suitable place.
2. Unfold the e-scooter according to the specified instructions.
3. Ascertain that the handlebar is parallel to your body before starting the e-scooter.
4. Before using the e-scooter, visually check that all nuts and bolts are tight and in place.
If a component is missing or shows signs of wear or tear or you are not sure about the
technical condition, bring the e-scooter to an authorized service center for inspection.
5. Always check the brakes and mechanical functions before each ride.
6. Ensure that the safety catch is locked with the slider down.
7. For the first ride we recommend setting a lower scooter performance. Maximum
speed will be limited to 18 km/h.
Riding on the e-scooter
1. Press the power button (ON/OFF) for more than 3 seconds to activate the e-scooter.
2. One short double-click to turn on and turn off the lights.
3. For a safer start, start with the help of another person. First place one foot on the deck
of the e-scooter, leaving the other foot securely on the ground. Slowly press the throttle.
4. When the e-scooter starts moving, place the other foot on the e-scooter, press
the throttle, accelerate.
5. To activate the electric e-scooter drive from zero speed, it is necessary to push off
several times from the ground to achieve a certain speed. You can then use the speed
levers on the handle to add gas and accelerate the e-scooter.
6. When braking, tilt your weight backwards so that the braking effect comes across
the legs rather than the handlebars and steering.
Stopping the e-scooter and switch off
Squeeze the brake slightly to reduce power to the engine and reduce the speed. Place
one foot on the ground after braking. Never abruptly brake or stand on the brakes,
it may lead to faster wear on the braking mechanism and consequently reduce comfort
from riding. To turn off the e-scooter, press long the ON/OFF button.
Automatic shutdown
When the e-scooter is stopped (speed = 0) and you do not intervene with the display
for more than 10 minutes, the system will automatically shut down and save energy.
In case the lights are turned off. Pressing the ON/OFF button for more than 3 seconds
will turn the system back on.
TIP:
To accelerate, tilt forward, moving your weight backwards when braking.
E-scooter maintenance
The e-scooter is assembled by professional technicians. Any attempt to disassemble
and repair the e-scooter or its parts separately may damage the e-scooter and void
the manufacturer’s warranty upon delivery.
Lubrication
Every six months regularly maintain the folding system and lubricate the moving
parts, especially the handlebar folding mechanism with a small amount of lubricating
oil. Do not use WD40 and do not lubricate the wheels.
Brakes
The brakes are already directly set from production. If the braking distance is
insufficient or you find the braking to be noisy, contact your dealer to purchase
replacement brake pads if necessary. The back light is flashing when braking.
Troubleshooting
If the e-scooter is not working normally, check the following: the e-scooter appears to
start; the battery capacity on display; that the brake is released;
Product parameters
Model
BTX250
total dimensions (max.)
114 x 42 x 122 cm
weight of e-scooter including battery
12,5 kg
Performance
engine power
250 W
highest load
100 kg
max. speed*
~25 km/hr
climbability
14°
riding range*
30 km
Battery parameters
battery type
lithium battery
Voltage
36 V
capacity
7,8 Ah
Charging parameters
input voltage
AC 100~240 V
charging time
5 hrs.
Lighting
front
yes
rear
yes
Tires
Tire size
8,5”
type of front tire
tubeless tyre
type of rear tire
tubeless tyre
* Speed and range depend on the rider’s weight, terrain layout, number of starts, driving style, battery wear.
>
25
24
<