Software User Manual - TIM-UP – 19k-S3-Spartan 6
Last change: 19 August 2014
Version 5
If the resulting value is greater than the ambiguity range subtract the ambiguity range. If the
value is less than 0, add the ambiguity range.
3.2
USB Interface
For interfacing the TIM
uP
- 19k-S3-Spartan6 module over USB, a powerful Software Development Kit is
provided. The SDK runs under Linux and Windows. Refer to our support site for downloading the SDK and
for additional information and documentation.
Software and documentation
https://support.bluetechnix.at/wiki/TIM-UP-19k-S3-Spartan6
3.3
ISM / I
2
C Interface
3.3.1
I
2
C Configuration Interface
The TIM
uP
- 19k-S3-Spartan6 module can be configured using an I²C connection. The I²C control interface of
the TIM
uP
- 19k-S3-Spartan6 module is listening on the following I
2
C slave address:
•
I
2
C Address:
0x5D
•
SCL Frequency:
up to 400kHz
The TIM
uP
- 19k-S3-Spartan6 module has a set of 32bit registers and is addressed by a 16bit address
pointer. Following two figures show the timing diagrams of the I2C read and write.
Figure 3-2 I
2
C register read timing diagram
Figure 3-3 I
2
C register write timing diagram
For a complete register description refer to:
Template No.: 900-306 / A
Page 8 | 19
