Bluetechnix Argos3D - P100, Руководство пользователя

Страница: 14 / 25

Hardware User Manual - Argos3D – P100 Last change: 22 August 2013
Version 1.5
7 Appendix
7.1 Operating Conditions
Symbol Parameter Min Typical Max Unit
V
IN
Input supply voltage 4.9 5.0 5.2 V
I
IN
Input current
1)
TBD 900
1)
TBD mA
T
OP
Operating Temperature 0 +65
2)
°C
T
STG
Storage Temperature -40 +125 °C
FITP
3)
Frame-rate Integration Time Product 550
Table 7-1: Operating Conditions
1) Note
Valid for a frame-rate of 40fps and an integration time of 1500µs. The input current depends on
the applied frame-rate and integration time. Please refer to 7.1.1.
2) Note
The maximum operating temperature depends on the frame-rate and integration time. Refer to
Figure 2-1 for recommended integration time to frame-rate combinations.
3) Note
Refer to 7.4.2 for valid frame-rate to integration time combinations.
7.1.1 Input current
The input current depends on the selected frame-rate (fps) and the integration time (t
INT
). The following figure
shows typical values. The values for the x axis shows the Frame-rate Integration Time Product (FITP) which
is calculated as follow:
𝐹𝐹𝐹𝐹𝐹𝐹𝐹𝐹 = 𝑡𝑡
𝐼𝐼𝐼𝐼𝐼𝐼
[ 𝑚𝑚𝑚𝑚 ] ∙ 𝑓𝑓𝑓𝑓𝑚𝑚 �
1
𝑚𝑚
� ∙ 4
© Bluetechnix 2013 Page | 13