Software User Manual - Argos 3D-P320
Last change: 2 February 2016
Version 0.14
© Bluetechnix 2016
Page 51 | 70
Addr (hex)
Register Name
Default Value (hex)
R/W
Description
Bit[9]: … state of OUT_1 (R/W)
Bit[10]: … state of OUT_2 (R/W)
Bit[11]: … state of OUT_3 (R/W)
Table 5-2: Registers for GPIO Control
5.3
Registers for Color Image
Addr
(hex)
Register Name
Default
Value
(hex)
R/W Description
00E0
ColorStreamParams
0022
R/W This register configures various options to
transmit data from the color sensor.
Bit[0]: 1…Enable autonomous RTP stream
Bit[1]: Color channel format (for image modes
with color sensor data, and for the autonomous
UDP data stream)
0 … RGB565
1 … JPEG compressed
Bit[2]: 1…Enable autonomous UDP data stream
Bit[4..6]: Color sensor resolution
0 … QCIF (176x144)
1 … QVGA (320x240)
2 … VGA (640x480)
3 … NTSC (720x480)
4 … PAL (720x576)
5 … XGA (1024x768)
6 … 720P (1280x720)
7 … 1080P (1920x1080)
Bit[8]: Color sensor frame rate
0 … 15 fps
1 … 30 fps
Bit[13]: RTP stream format
0 … H.264-in-RTP video
1 … Raw-in-RTP video
(YCbCr 4:2:0)
00E1
ColorSensorControl
0003
R/W Bit[0]: 1 … AEC/AGC enabled
Bit[1]: 1 … AWB enabled
00E2
ColorSensorExposure
0132
R/W Exposure register value for color sensor
00E3
ColorSensorGain
001A
R/W Gain register value for color sensor
00E4
ColorTo3DDelayLowWord
R
Difference between the timestamp of the 3D
sensor and the color sensor in µs, if current
image data format selects ToF and color sensor
data (Int32)
00E5
ColorTo3DDelayHighWord
R
Difference between the timestamp of the 3D
sensor and the color sensor in µs, if current
image data format selects ToF and color sensor
data (Int32)
Table 5-3: 2D Imaging Registers