PLATINUM SERIES
V2
USER MANUAL
12
www.blustream.co.uk
Infrared (IR) Control
Remote Control Description
The Blustream Platinum Series matrix units are supplied with IR Remote Control for source selection and general
setup.
As well as controlling matrix solutions using the original Blustream remote the Blustream products can be controlled
using the original Infrared NEC codes shown at the rear of this manual.
OUTPUT AND INPUT SELECTION
A
Select the zone OUTPUT you wish to change the source on
(Numbers 1-8 correspond to the zone outputs 1-8).
B
Select the source INPUT you wish to change on the selected
zone to
(Numbers 1-8 corresponds to the source inputs 1-8)
C
Press PTP button If you wish to instantly mirror all inputs
and outputs
(Example - Input 1 to output 1, input 2 to output 2 etc).
EDID SET UP
The PLAxx V2 provides a comprehensive range of EDID settings.
Below are three examples of how to deploy the desired EDID setting
when using the supplied remote.
A.
Fix EDID to an Input or ALL inputs:
Press the desired video
resolution button (1080I / 1080P / 3D / 4K), then select the
desired audio format (2.0CH / 5.1CH / 7.1CH), then select the
source input you want this EDID information allocated to by
pressing the INPUT 1 – 4 or the ALL button
B.
Copy EDID of Output-X to an Input or ALL:
Press the COPY
but-ton then select the OUTPUT you wish to copy the EDID
information from, then select the source input you want to copy
this EDID to by selecting the INPUT 1-4 or the ALL button.
C.
User defined EDID to an Input or ALL inputs:
Press USER1 /
USER2 button then select the source you wish to assign this EDID
to by select-ing INPUT 1-4 or the ALL button
POWER
1
ALL
PTP
OUTPUT
2
3
4
1
ALL
INPUT
2
3
4
POWER
1
ALL
PTP
OUTPUT
2
3
4
5
6
7
8
1
ALL
INPUT
2
3
4
5
6
7
8
1080i 1080p
3D
4K
USER1 USER2
FN1
EDID
FN2
2.0CH 5.1CH 7.1CH COPY
1080i 1080p
3D
4K
USER1 USER2
FN1
EDID
FN2
2.0CH 5.1CH 7.1CH COPY
B
C
A
