contact
[email protected] / [email protected]
HSP14CS
QUICK REFERENCE GUIDE
Front Panel
Panel Descriptions
1
Power button - press to power on / off the splitter
2
Power LED indicator - indicates if the unit is on or off
3
Input LED indicator - indicates if a source is attached and is active
4
HDMI output indicator - indicates if a HDMI output is attached and is active
5
HDBaseT™ output indicator - indicates if a HDBaseT™ receiver is attached and an active link is available on the output
6
Upgrade port
1
HDMI input - connect to a HDMI source
2
HDMI output - connect to a HDMI display or additional HDMI distribution equipment
3
HDBaseT™ outputs - connect to HDBaseT™ receivers
4
HDBaseT™ link lights
5
IR input - 3.5mm stereo jack. Transmits IR to the zone HDBaseT™ receivers (displays)
6
IR output - 3.5mm mono jack. Connect to Blustream 5V IR emitter for source control from remote areas
7
Coaxial audio out - RCA connector, de-embedded audio from the HDMI input
8
L/R audio out - 3.5mm stereo jack, de-embedded audio from the HDMI input. Source input must be PCM 2ch audio
f
or the analogue audio output to work. The HSP14CS does not down-mix 5.1ch audio signals.
9
EDID DIP switch - used for global EDID settings, see page 3
q
Power port - use supplied Blustream 12V adaptor to power the splitter
1
2
3
4
5
6
1
2
3
5
6
7
8
9
10
4
Rear Panel
Upgrade
Output
HDMI
HDBT1 HDBT2 HDBT3
HDBT4
Input
Power
4-Way HDBaseT™ Splitter - Supporting 4K 60Hz 4:4:4 (40m)
Link
Link
Link
Link
IR IN
0
0
1
2
3
1
IR OUT Coaxial
Audio Out
EDID
DC 12V
L/R
Input
Output
HDBT Output 4
HDBT Output 3
HDBT Output 2
HDBT Output 1
HSP14CS
02
