HMXL66ARC
QUICK REFERENCE GUIDE
www.blustream.com.au
|
www.blustream-us.com
|
www.blustream.co.uk
02
Front Panel Description
Rear Panel Description
1
2
3
8
9
1
5
6
7
2
1
IR Receiver Window
2
LCD Display – Shows the status of input /
output selection, EDID etc...
3
Menu Button - Press to access Matrix menu.
Refer to full manual for details
4
Power Button – Press to power on / off the
Matrix
5
Selection Buttons - Multi-use buttons
Primary Use:
First press = HDMI output selection - Press
to select an output from 1 to 6. Output(s)
selected will be displayed on the Matrix
display. Multiple outputs can be chosen.
Then wait 3 seconds or press ‘SELECT’ to
move to input selection.
Second Press = HDMI input selection -
Press to select the input from 1 - 6. The
Input selected will be displayed on the
Matrix display. Press the Select button to
confirm switch
6
Select Button – Press to confirm changes
within the Matrix menu
7
ESC - Press to exit MENU mode
Secondary Use:
When the MENU button has been pressed
buttons 2, 3, 5 & 6 are used as cursors to
navigate the MENU system
2 = Left
3 = Up
5 = Right
6 = Down
3
4
4
5
7
10
11
13
12
6
14
15
1
IR Control Input - 3.5mm stereo connector
to connect to Blustream IR receiver for IR
control of the Matrix
2
TCP/IP - RJ45 connector for TCP/IP and
Web GUI control of the Matrix
3
RS-232 - Phoenix connector for RS-232
control of the Matrix
4
EDID DIP switch – Used for global EDID
settings
5
IR Outputs - 3.5mm mono connector to
connect to Blustream IR emitter. Used for
local source control
6
Optical and Analogue Audio Outputs -
independent audio Matrix with 6 x dual
outputs (T 3.5mm
L/R line level
stereo jack).
For connection to 3rd party
audio devices
.
NOTE:
Analogue audio
outputs support 2ch PCM only
7
IR Inputs - 3.5mm stereo connector to
connect to Blustream IR receiver or Control
Processor. Used to extend IR from Matrix to
HDBaseT™ Outputs 1-6
8
Bi-directional RS-232 ports. Connect to
third party control device to extend RS-232
commands to HDBaseT
™
receivers RS-232
port
9
Optical (Toslink) Audio Input - Connect to
source device for audio distribution within
the HMXL66ARC independent audio Matrix
q
Analogue Audio Input -
3.5mm
L/R stereo
jack. Connect to source device for audio
distribution within the HMXL66ARC
independent audio Matrix
w
HDMI Inputs - Connect to source devices
e
HDMI Output - Connect to display device
r
HDBaseT™ Outputs - RJ45 HDBaseT™ port
to connect to the HDBaseT™ input port
of the compatible Blustream HDBaseT™
receiver
t
IEC Power Socket - Use supplied IEC power
cable
y
Power Switch
