Bluestream HEX70ED-KIT-V2, Руководство пользователя

Страница: 5 / 10

HEX70ED-KIT-V2
USER MANUAL
05
contact
support@blustream.co.uk / support@blustream.com.au
Terminating the interconnecting HDBaseT CAT cable
It is important that the interconnecting CAT cable between the Blustream HDBaseT products is terminated using the correct RJ45
pin configuration. The link CAT cable
MUST
be a ‘straight’ (pin-to-pin) CAT cable and it is advised that this is wired to the T568B wir-
ing standard as this format is less prone to EMI (Electro-Magnetic Interference).
When installing CAT cables it is advised that you use the best possible CAT cable quality possible. HDMI distribution products will
only work if used with CAT5e standard cable or above. Blustream recommends using a CAT6 cable for your installations, especially
when running over longer distances, in areas of high EMI, or for 4K signal distribution.
Understanding the HEX70ED-V2 signal status lights
The Blustream HEX70ED-V2 extender solutions include status LED indicators on both the Transmitter and Receiver products to
show all connections are active and to help diagnose possible problems.
Understanding the status lights:
Receiver:
• The HDMI signal link light will be off when there is no connection with a display/sink
• The HDMI link light will be on when there is an active connection with a display
• The HDBaseT link light will be off when there is no CAT cable/active HDBaseT connection on the RJ45 HDBaseT input
• The HDBaseT link light will blink if there is an unstable connection between the Transmitter/Matrix and Receiver
• The HDBaseT link light will be lit when a CAT cable is connected to the HDBaseT RJ45 output on the Transmitter/Matrix and an
active connection is achieved with the Receiver.
Transmitter:
• The Input HDMI signal link light will be off when there is no connection with a source device
• The Output HDMI signal link light will be off when there is no connection with a display/sink
• The Input HDMI link light will be on when there is an active connection with a source device
• The Output HDMI link light will be on when there is an active connection with a display/sink
• The HDBaseT link light will be off when there is no CAT cable/active HDBaseT connection on the RJ45 HDBaseT output
• The HDBaseT link light will blink if there is an unstable connection between the Transmitter and Receiver/Matrix
• The HDBaseT link light will be lit when a CAT cable is connected to the HDBaseT RJ45 output on the Transmitter and an active
connection is achieved with the Receiver/Matrix.
Blustream Support department are on hand to assist with signal distribution issues should they arise - please email us at one of
the email addresses below.
RJ45 Wiring - T568B