CHARGING
To charge the headphones simply insert the micro USB end of the supplied cable into the USB
CHARGING PORT and the standard USB end into a USB port on a USB charger or computer.
The LED INDICATOR will turn Red when the headphones are charging.
The LED INDICATOR will turn Off when the headphones are fully charged.
POWER
To turn the headphones ON, press and hold the POWER button until you hear the start up chime.
The LED INDICATOR will begin flashing RED & BLUE.
PAIRING TO YOUR BLUETOOTH DEVICE
1. Turn your Bluetooth device OFF entirely and then turn it back ON to refresh the
device’s Bluetooth memory.
2. Find the Bluetooth menu in your device and make sure the Bluetooth function is turned
ON (refer to your device’s user manual for instructions on finding the Bluetooth menu).
3. Turn the Headphones ON and unplug the headphone cable from the 3.5mm INPUT if
necessary.
4. On your device, perform a Bluetooth “device discovery” to add the
BS301HPBT/BS302HPBT as a new device.
5. When
the
headphones
are
discovered
your
device
will
display
“
BS301HPBT/BS302HPBT
” in the Bluetooth menu.
6. After selecting “
BS301HPBT/BS302HPBT
” from the Bluetooth menu the LED
indicator will turn BLUE and there will be a sound chime to indicate that the Bluetooth
Pairing was successful.
7. If supported by your device’s menu, set the BS301HPBT/BS302HPBT as “set as
authorized” or “add to trusted devices”
PLAYING MUSIC
After successfully pairing the headphones with your Bluetooth device, you can begin playing
music simply by choosing the song you wish to hear on your device’s menu system (refer to
your device’s user manual for instructions on playing music).
PLAYBACK & VOLUME CONTROLS
All playback controls (Play, Pause, Next/Previous song, etc.) can be controlled either directly
on your device, or on the buttons on the headphones.
To turn the headphones OFF, press and hold the POWER button until you hear the shut-down
chime. The LED INDICATOR will turn OFF.
Note: the LED INDICATOR slowly flashes Blue during playback.
