PLAYING A NON-BLUETOOTH iPod, MP3 PLAYER, or OTHER DEVICE
1. Plug one end of a 3.5mm stereo audio cable (not included) into the
AUX-IN JACK
(15)
on the left side of the player.
•
NOTE: The player will automatically stop BLUETOOTH, CD or RADIO playback
and switch to the AUX-IN connection.
2. Plug the other end of the cable into the headphone jack or audio output of your
external device.
3. Adjust the volume on your external device to an acceptable level.
4. Press PLAY on your external device to being listening.
•
NOTE: All playback controls (Play/Pause, Stop, Next/Previous, must be
controlled on your external device)
5. To resume BLUETOOTH, CD, or RADIO playback, simply unplug the 3.5mm stereo
audio cable from the
AUX-IN JACK (15)
.
LISTEN TO AM/FM RADIO
1.
Adjust the
FUNCTION SWITCH (12)
to the
RADIO
position.
2.
The FM Radio will automatically begin playing.
3.
Press the
PLAY / PAUSE
button
(1)
to switch between the AM & FM tuners.
4.
Slowly adjust the
TUNING KNOB (13)
to select the desired Radio station.
•
TIPS FOR BEST RECEPTION
o
The AM & FM antennas are built-in to the cabinet of this player. To
improve reception of radio stations simply move the entire player to
another location until reception improves.
TROUBLESHOOTING
Symptom
Possible Cause
Solution
Noise or sound
distorted on AM or
FM broadcast
- Station not tuned properly for
AM or FM.
- FM: Player is not positioned
correctly
- AM: Player is not positioned
correctly
- Retune the AM or FM
broadcast station.
- FM: Reposition the unit until
the best reception is obtained.
- AM: Reposition the unit until
the best reception is obtained.
AM or FM no sound
- Player not in “RADIO” mode.
- Volume set at minimum
- 3.5mm cable is plugged into
the AUX-IN JACK (15)
- Slide Function Switch (12) to
“RADIO” position.
- Increase Volume.
- Unplug the 3.5mm cable
CD player will not
play
- Unit not in CD mode.
- 3.5mm cable is plugged into
the AUX-IN JACK (15)
- CD is not loaded properly.
- If the CD is CD-R, the media
used may not be compatible
with the player.
- Select CD function mode.
- Unplug the 3.5mm cable
- Load CD with label side
up.
- Burn a better quality blank CD
and retest.
CD skips while
playing
- Disc is dirty or scratched.
- Wipe CD with clean cloth or use
another disc.
Intermittent sound
from CD player
- Dirty or defective disc
- Player is subject to excessive
shock or vibration
- Clean or replace the defective
disc.
- Relocate the player away from
shock or vibration.
Sound appears
distorted at high
volume setting
- Volume control is set to
maximum.
- Adjust Volume Control to a
lower comfortable level.
6
