PLAYING A CD
1.
Open the
CD Door (8)
by gently lifting the door with your thumb and index finger.
2.
Insert a CD with the label side facing UP.
3.
Close the
CD Door (8)
by gently pressing down on the door with your finger.
4.
Adjust the
FUNCTION Switch (17)
to the
CD / BT
position. The unit will automatically
turn ON and the total number of tracks (songs) on the CD will be shown on the
Display. If necessary press the
CD / BT
button
(3)
to set the unit to CD mode.
5.
Press the
PLAY / PAUSE
button
(14)
to start playing the CD. The
PLAY / PAUSE
Indicator Light (10)
will automatically turn on.
6.
Press the
PLAY / PAUSE
button
(14)
again to momentarily pause playback. The
PLAY / PAUSE Indicator Light (10)
will automatically start blinking. To resume
playback press the
PLAY / PAUSE
button
(14)
again.
7.
To Stop playing the CD press the
STOP
button
(4)
.
SKIPPING TRACKS (SONGS)
•
To skip to the next track press the
NEXT / F.FWD
button
(15)
•
To move to the beginning of the current track press the
PREV / F.REV
button
(13)
•
To skip to a previous track press the
PREV / F.REV
button
(13)
multiple times in a row
until the desired track is shown on the
LED Display (9)
.
SEARCHING TRACKS
•
While playing a CD press and hold the
NEXT / F.FWD
button
(15)
to scan Fast
Forward through the current track. Release the button when you reach the desired
portion of the track you want to hear.
•
Press and hold the
PREV / F.REV
button
(13)
to Fast Reverse through the current
track. Release the button when you reach the desired portion of the track you want
to hear.
PROGRAMMED PLAYBACK
Up to 20 tracks of a CD can be programmed to play in any desired order.
1. To set a Program order, first make sure the CD is not currently playing by pressing
the
STOP
button
(4)
2. Press the
REPEAT / PROGRAM
button
(5)
. The
PROGRAM Indicator Light (6)
will
automatically start blinking, and the Display will start blinking “
01
”
3. Press the
NEXT / F.FWD (15)
or
PREV / F.REV (13)
button until the number of the
first track you want to program is shown in the
LED Display (9)
.
4. Press the
REPEAT / PROGRAM
button
(5)
to program the track. The
LED Display (9)
will automatically start blinking “
02
”.
5. Repeat steps 3 & 4 to program up to 20 different tracks.
6. When you have finished selecting tracks, press the
PLAY / PAUSE
button
(14)
to start
playing the CD in the order you have programmed. The
PROGRAM Indicator Light
(6)
and
PLAY / PAUSE Indicator Light (10)
will both turn ON.
7. To stop Programmed Playback press the
STOP
button
(4)
twice. The
PROGRAM
Indicator Light (6)
will automatically turn OFF.
REPEAT PLAYBACK
•
To Repeat a Single Track press the
REPEAT / PROGRAM
button
(5)
once.
The
REPEAT Indicator Light (11)
will automatically start blinking.
•
To Repeat the Entire CD press the
REPEAT / PROGRAM
button
(5)
twice.
The
REPEAT Indicator Light (11)
will automatically turn ON.
•
To cancel Repeat Playback press the
REPEAT / PROGRAM
button
(5)
continuously
until the
REPEAT Indicator Light (11)
turns OFF.
5
