EACH OF THESE DEVICES IS INTENDED
TO HELP YOU SAVE YOUR OWN LIFE:
1. Check the inflation mechanism status indicators before each use.
For your PFD to function properly, follow these suggestions to verify
that it fits, floats, and remains in good condition.
2. Get in the habit of rearming the inflation mechanism right after each
inflation.
3. Try your wearable PFD on and adjust it until it fits comfortably in and
out of the water.
4. Mark your PFD with your name if you are the only wearer.
6. Your PFD is not intended for use as a fender or kneeling pad.
7. If your PFD is wet, allow it to dry thoroughly before storing it. Store it
in a well-ventilated area.
8. Do not dry your PFD in front of a radiator or other source of direct
heat.
DO NOT ATT
ACH PFD’S
TO THE BOAT*
5. Do not alter your PFD. If it doesn’t fit properl
y, get one that does.
An altered device is not longer Coast Guard approved.
ADDITIONAL INFORMATION:
If you need more information about PFDs and safe recreational boating,
contact your state boating authority, U.S. Coast Guard Auxiliary, U.S.
Power Squadron, Red Cross, or your nearest unit of the U.S. Coast
Guard; or the free boating course number 1-800-336-BOAT (in VA,
1-800-245-BOAT).
*Safety harness D-rings on models ZH1H
is designed to be
attached to be fastened to the boat. See instructions on page 13 of the
Manual.
Each PFD has straps, hooks, buckles, or other means for securing the
device in place on the wearer. Some PFDs also incorporate decorative
dee rings or tabs. Such items are not to be used to attach the device to
the boat. Attaching the device to the boat will not permit it to perform as
needed.
Содержание Z1H
Страница 15: ......