Bluestone ICB-6835, Руководство пользователя

Страница: 22 / 24

If it is still not working after the inspection by yourseft, please immediately contact
our service points, do not apart the unit by yourseft or our company is out of
responsibility.
DO NOT TRY TO ADJUST OR REPAIR THIS APPLIANCE BY YOURSELF.
TROUBLE SHOOTING
The case below do not mean the appliance breaks down, please check by yourseft
before sending to repair.
MALFUNCTION REASON INSPECTION
No beep, all indicator
lights and nixie tube are
not bright.
No power. Plug in or not? Power
off or not? Power cord is
okay?
The touch controls are un-
responsive.
The controls are locked. Unlock the controls. See
Section “Locking the
control” for instruction.
The touch controls are
difficult to operate.
There may be a slight film
of water over the controls
or you may be using the
tip of your finger when
touching the controls.
Make sure the touch control
area is dry and use the ball
of you finger when touching
the controls.
Display show E0 Equipment broken circuit. Take the nearsest sevice
station for repair.
Display show U. There is not pot for suitable. Using the pot for suitable.
Display show E2. IGBT disconected. Check the connection
or replace the induction
cooker temperature sensor.
Display show E3 or E4. Supply voltage is not right. Check the voltage.
Display show E6, E7. Thermal sensor is broken. Check the power supply
or replace thermal sensor.
Display show E8, E9. The heat sink temperature of
the damaged IGBT (open
circuit or embolism).
Replace the power board.
ENGLISH ENGLISH
22 23