11
17
18
ENGLISH
ENGLISH
Fault Display
Malfunction
Inspection
E0
E1
E2
E3 or E4
E5
E6
E7
No beep, all indicator lights
and nixie tube are not bright
It stops heating suddenly
when using, the machine
continues beeping.
After starting up, the machine
of continuous send a short"
beep"
Use of a sudden stop heating,
the machine continuously
send a short" beep"
Use of a sudden stop heating,
the machine continuously
send a short" beep"
After starting up, the machine
of continuous send a short"
beep"
Use of a sudden stop heating,
the machine continuously
send a short" beep"
Use of a sudden stop heating,
the machine continuously
send a short" beep"
Constant temperature mode
temperature control
Plug in or not? Power off or
not? Power cord is OK?
Something wrong with the
circuit inner machine, please
repair.
If there is a pot? Pot material
and size, shape, right? Pot is
placed in the middle of the
microcrystal panel?
Ambient temperature is very
high? Air inlet, air outlet is
blocked?
The voltage is too high or too
low?
The panel temperature sensor
open, please repair.
The panel temperature sensor
short, please repair.
Wire coil temperature is too
high, after cooling to use. If
the cooling is not used, please
repair.
“Frying" indicator light is
bright? The bottom is uneven
or central part of depression?
If it is still not working after the inspection by yourself, please immediately
contact our service points, do not apart the unit by yourself or our company is
out of responsibility.
Be sure to use the power cord recommended by the appliance manufacturer
after it is damaged.
DO NOT TRY TO ADJUST OR REPAIR THIS APPLIANCE BY YOURSELF
ENVIRONMENT FRIENDLY DISPOSAL
You can help protect the environment!
Please remember to respect the local regulations: hand in the
non-working electrical equipments to an appropriate waste
disposal center.
