21
20
ENGLISH
ENGLISH
APPLICABLE VESSEL
1
Material required
2
Please kindly according to the below requirement
•
Steel, enameled iron, stainless steel, flat-bottom pans/pots with bottom
diameter from 12cm to 26cm.
•
So suggest to use the required pot, do not try to use other pot instead
(especially pressure sensors vessels.)
•
Weight requirements: the pot (including the food and water inside) is less
than 15kg.
•
Pan/pot must be suitable for induction cooker.
•
Pan/pot should be tried out if it’s bought by yourself to see if there are
unusual phenomena.
•
Pan/pot bought by yourself should be flat and come with the cover with gas vent.
Notes:
For safety, you must pour water full of pot and boil to reject impurities before
first use.
CLEANING AND MAINTENANCE
1. Remove the power plug prior to clean the unit. Do not clean it until the surface
cools down.
2. Glass plate, panel and the shell
* Soft cloth for slight stain.
* For greasy, dirt, blot by using a clean damp cloth with neutral detergent.
3. While the radiator fan working, dust and dirt would remain on the gas vent,
please clean it by brush or cotton stick regularly.
4. Remember do not wash the unit by water directly to avoid damaging.
5. To protect induction cooker, be sure to have a good contact between plug and
socket before using.
6. Do not pull out the power cord directly during operation. To extend the
appliance’s using life, press “TẮT/MỞ” button first, then pull out the power cord.
7. The fan would still working for cooling the plate. In order to make operating
time longer, it is better to plug out after the fan stops working.
8. Please pull out the power cord and put it away when not used for a long time.
TROUBLE SHOOTING
FAULT
DISPLAY
POSSIBLE REASON
SOLUTION
Without pot or not the suitable
pot, sounds “beef“ in every 2.5
seconds, the induction cooker
will be off automatically after 50
seconds.
Put a suitable pot and Restart
the induction cooker.
E0
Un-normal voltage supply:
Voltage too Low
It will be fine when the
voltage become normal
STIR FRY – “XÀO”
•
When power on, touch the “
XÀO
” key, the digital screen displays 200
o
C
•
Please press the “
+
” or “
-
“ key to change the temperature in a range from 60-280
o
C
SOUP – “SÚP”
•
When power on, touch the “
SÚP
” key, the digital screen displays 1600W
•
With this function, users are not able to adjust power.
STEAM – “HẤP”
•
When power on, touch the “
HẤP
” key, the digital screen displays 1600W
•
Please press the “
+
” or “
-
“ key to change the power in a range from 120-2000W.
TIMER
•
During the heating, touch the “
HẸN GIỜ
” key to settle time required.
•
Under Function “
NẤU LẨU
”, “
CHIÊN
”, “
XÀO
”, “
HẤP
”, timer can be adjusted with
maximum setting 4 hours. The induction cooker will be stop heating automatically
once the timeout.
•
Under Function “
SÚP
”, timer function can be adjusted with maximum settings 24
hours. The induction cooker will be start heating automatically once the timeout.
