1-2c
m
''
(0.4
-0.8
)
M
Unit Operation
Unit Operation
Unit Operation
Battery Installation
1. Time /Date Setting
With power off ,Press " " button 3 seconds to set the Time/Date
mode. Set the month first by adjusting the "M " button. Press
“
" button again to confirm current month.
Continue setting the day, hour and minute in the same way.
Every time the " " button is pressed, it will
lock in your selection and continue in succession (month, day,
hour, minute.)
11
13
12
14
2. Save Settings
While in any setting mode, press " " button
to
turn the unit off. All information will be saved.
about 3seconds
Slide battery cover off as indicated by arrow.
Install 2 new AAA alkaline batteries according to polarity.
Close battery cover.
Note:
1)
" "
2) Batteries should be removed from device when not in
operation for an extended period of time.
Replace batteries when Low Battery Indicator
appears on screen.
Applying The Wrist Monitor
Do not apply over clothing. If wearing a long sleeved shirt,
be sure to roll sleeve back to forearm.
Apply monitor to wrist as illustrated. Tighten cuff firmly as
not to wiggle.
Note: Unit will automatically save all information and shut off
if left it for 3 minutes.
Unit Operation
15
M
D
Quick Start
4. Sit in a comfortable position and place wrist level with heart.
(See Figure D)
5. Press
button to start testing. (See Figure E)
" "
Figure E
Figure D
Unit Operation
16
Do not stand while testing. Sit in a comfortable position and
place wrist level with heart.
M
M
