16
TURNING THE COOKTOP ON/OFF
Action
Control panel
Display
To start
press [ main On/Off ] key
[ 0 ]
To stop
press [ main On/Off ] key
nothing or [ H ]
TURNING A HEAT ZONE ON
Action
Control panel
Display
Select heat zone
Press heat zone “On/Off” key
[ ON ]
To set
move the “SLIDER”
[ 1 ] to [ P ]
(adjust the power)
to the right or to the left
To stop
slide to [ 0 ] on “SLIDER“
[ 0 ] or [ H ]
If no pan makes contact with the surface in 20 second the electronics returns to waiting.
PAN DETECTION
The cooktop will not warm:
If there is no pan on the heat zone or if this pan is not compatible with induction.
Without a pan it is not possible to increase the power and the display will show [ U ].
This symbol disappears when a pan is put on the heat zone.
If the pan is removed from the heat zone the operation is stopped. The heat zone will
display [ U ]. The symbol [ U ] disappears when the pan is put back to the heat zone.
The cooking continues with the power level set before.
After use, switch the heat zone OFF, don’t let the pan detection [ U ] active.
RESIDUAL HEAT INDICATION
After the heat zone or the Main switch is turned OFF the heat zones will still be hot and the
cooktop will indicate [ H ] on the display.
The symbol [ H ] disappears when the heat zones have been cooled and can be touched.
When the residual heat indicators [ H ] are illuminated do not touch the heat
zones or not put any heat sensitive objects on them. Risks of burn and fire are
possible.
BOOST AND DOUBLE BOOST FUNCTION
Boost [ P ] and Double Boost [
] supply additional power to the selected heat zone.
If this function is activated the heat zones will work for 10 minutes with additional power.
This is perfect for a rapid boil of water or a high heat sear.
ATTENTION
TIP
WARNING
