BlueStar BBB36R/L, Инструкция по использованию и уходу, Страница: 7 / 28

bluestarcooking.com 7
Plumbing
Location: The water line should be located in the
area marked “Water” in Fig 1. This area
also extends 10” forward on the floor.
If it is outside this area, it may be
damaged during installation and
prevent the refrigerator from being
installed at the proper depth.
Requirements:
The water line must use 1/4” OD
copper, braided stainless steel, or PEX
tubing and have 36” of excess line.
Water Pressure: The water pressure must be between
35-120 psi.
Important: The water line cannot be exposed to
temperatures below freezing.
Connect the water line to the household water supply with
an easily accessible shut-off valve, not a self-piercing
valve. Purge the water line before connecting it to the
refrigerator. This will remove any debris that may be
present.
Fig 1
2 1/2”
9”
10”
15 1/2”
84”
Electrical 6 1/2”
3”
Top Anchor Bracket
35 1/2”
Water
3”
Site Preparation