01
Thank you
for purchasing a Blue Spot Tools product, you can find further information
on our range at
www.BlueSpot.uk.com
. Please ensure that you are using the product
correctly and that all guidance and cautions are followed in accordance with the
instructions. Please retain these instructions for future reference.
General Information
Please make sure that you read these instructions carefully in order to avoid injury when using
the brake and clutch bleeder kit. Follow all health and safety rules and regulations. If in doubt
and available please contact a more knowledgeable source.
DO NOT use if damaged.
•
ALWAYS
ensure you have read through all of the instructions and fully understand how
to operate the tool before beginning.
•
ALWAYS
check the brake and clutch bleeder kit for any damage before use. Any damage
found needs to be repaired or replaced before use to prevent damage to property or personal
injury.
•
ALWAYS
dress appropriately – clothing should be close fitted and long hair tied back.
Jewellery should be removed and shoes should be worn with a non-slip sole.
•
ALWAYS
wear the correct PPE equipment. Approved eye protection should always be
worn. If brake fluid enters the eyes make sure they are rinsed immediately with plenty of
water and seek medical advice. If brake fluid is swallowed seek medical advice immediately.
•
ALWAYS
ensure you work in a well ventilated room.
•
ALWAYS
check for missing or damaged parts before use.
•
ALWAYS
check the vehicle for broken or damaged parts that could impact on the tools
operation.
•
ALWAYS
ensure you feel comfortable and confident in knowing what you are doing with the
brake components and brake lines. If you feel unsure or have questions please seek
professional advice.
•
ALWAYS
refer to the manufacturer’s instructions when lifting, removing wheels or
dissembling the braking system.
•
ALWAYS
refer to the manufactures instructions when reassembling the braking system
or wheels.
•
BE AWARE
that only new brake fluid should be used. If used brake fluid is used this will
cause damage to the system and possible brake system failure could occur.
Safe use
•
BE AWARE
that brake fluid is flammable. Always keep brake fluid away from sources of
ignition, including hot surfaces.
•
BE AWARE
that brake fluid can damage paintwork. If any brake fluid is spilled it should be
flushed with water immediately.
• Maintain tool in good and clean condition for best and safest performance.
• Keep the work area clean, uncluttered and ensure there is adequate lighting.
• Maintain correct balance and footing. Ensure the floor is not slippery and wear non-slip
shoes.
• Keep children and unauthorised persons away from the work area.
• ALWAYS
store the brake and clutch bleeder kit away correctly when not in use.
• ALWAYS
ensure waste liquids have been disposed of correctly and in accordance with local
authority regulations.
• DO NOT
allow untrained persons to use the kit.
• DO NOT
operate the tool if you are tired as this could be dangerous.
• NEVER
operate the tool if you are under the influence of drugs or alcohol as this can be
dangerous.
• DO NOT
make modifications to the brake bleeder kit.
• NEVER
use the brake and clutch bleeder kit to perform a task it was not designed to do.
• ALWAYS
stop using the tool straight away if you start to experience discomfort or pain.
Consult with a qualified health professional if needed.
• If the brake and clutch bleeder kit is damaged do not use.
