Bluesky CT-188, Руководство по эксплуатации, Страница: 5 / 11

5
Setup:
1. Setup time and date:
Press SET key when the unit is in standby mode. The SET
1dATE will be displayed. Press SET key again. The LCD should
be flickering on 20xx Press
▲ /UP or ▼ /down key to set year.
Press SET key to confirm the setting, Month should be
flickering. Press
▲ /UP or ▼ /down to set month. Press SET to
move to date. Press ▲ /UP or ▼ /down to set date etc., Press
DELETE to revert to standby mode after setting.
2. Setup area code:
In standby mode, Press SET key, the LCD will display SET
1dATE. Press
▲ /UP key, the LCD will display SET 2 ACOdE.
Press SET key again to enter the setting mode. The LCD will
display AcodE - - - -, The first – is flickering. Press
▲ /UP
or ▼ /down key to select the local area code. Press SET to move
and confirm the setting.
NOTE:
The area code is associated with the place where the
unit is connected. For example: If the unit was used in Taipei,
you can set the area code 02 or 2 to be deleted while the unit
receives a local call and will recall from the call memory. Press
DELETE to revert to standby mode.
3. Setup flash time:
In standby mode Press SET key the LCD will display
SET1dATE. Press
▲ /UP key repeatedly until the LCD displays
SET 3 FLASH. Press SET key again to enter the setting mode.
The LCD will display FLASH 0 1000. Press
▲ /UP or ▼ /down key
to select the flash duration. Press SET key to confirm. Press
DELETE key to revert to the standby mode.
The unit supplies with 110ms, 300ms, 600ms and 1000ms flash
duration. Set the flash time to 600ms if you have applied for call
waiting service.