NOTE: You can buy BLUEsky HS-999 Handset as your cordless handset extension.
Placing a Call
Using the Cordless Handset
1.
Pick up the handset and press the TALK button. The unit will automatically scan for the
best channel available.
2.
Once it finds a clear channel, the IN USE icon will be displayed in the LCD panel and a
dial tone will be heard. You can then dial the desired phone number on the handset
keypad.
Using the Base Unit:
y
Using Corded handset:
1.
Pick up the corded handset and listen for the dial tone.
2.
Dial the phone number.
y
Using base unit HANDFREE:
1.
Press the HANDFREE button on the base unit. The telephone icon will be
displayed in the LCD panel.
2.
Listen for the dial tone and adjust the HANDFREE volume to a comfortable level.
3.
Dial the phone number.
Receiving a Call
Using the Base Unit
•
Simply pick up the corded handset from the base cradle.
•
Using the Cordless Handset:
•
Pick up the handset from charger
•
Press the TALK button on the handset and start conversation with the caller.
Channel Selection (10 Channels)
Channel Scan (Auto-Scan)
•
When you initiate or receive a call using the Cordless Handset, the unit auto-scans for
the best channel available.
Channel Scan (Manual Scan)
•
If the existing channel becomes noisy or starts having radio interference, press the
CHANNEL button repeatedly until a clear channel is found.
Ending a Call
Using the cordless Handset:
y
Since the telephone features “Auto-standby” simply return the cordless handset to the
charger unit or press the TALK button if you are away from the charger unit.
Using the Corded Handset:
y
Place the corded handset on base cradle to hang-up.
9
7.
When inserting the battery into this product, the proper polarity or direction must be
observed. Reverse insertion of batteries can cause charging that may result in leakage
or explosion.
8.
Remove the batteries from this product if the product will not be used for a long period of
time (several months or more) since during this time the battery could leak in the
product.
9.
Discard “dead” batteries as soon as possible since dead batteries are more likely to leak
in the product.
10. Do not store this product, or the battery provided with or identified for use with this
product, in high-temperature areas. Batteries that are stored in a freezer or refrigerator
for the purpose of extending shelf life should be stabilized at room temperature prior to
use after cold storage.
11. Disconnect telephone lines before installing the battery pack.
DESCRIPTIONS
For all location of controls please refer to Chinese manual
CORDLESS HANDSET CONTROLS:
TALK Button
- Press this button to place a call, answer a call, or end a call.
CHENNEL Button -
(CH) Used to manually select one of the 10 operating channels in talk
mode.
CALLER ID Button
(CID) to browse the caller list in standby mode.
FLASH/DEL Button
(FLASH) Momentarily hangs up the phone to
access custom calling features provided by your local phone company. (DEL) press to delete
items.
Handset Antenna
- Telescopic antenna, extend for best reception.
“M1/M2/M3”Button
– Three One touch memory.
REDIAL/PAUSE Button
- (Redial) Press to automatically dial the last phone number dialed
up to 32 digits. (Pause) Allow you to insert a 3-seconds delay between dialed numbers in
PABX systems or long distance services during pre-dial mode. (CHECK) browse the outgoing
dialed number.
INTCOM Button -
Allows a two-way communication between the handset and base unit.
SET/CODE Button
- (SET) used to set timer. (CODE) used to initialize the security code for
the linking of the cordless handset and the base unit.
＊
(DOWN) Button -
Used as down function key in setting mode or CID browsing mode.
6
