TROUBLESHOOTING
!
SYMPT
OM
SOLUTION
No dial
tone
•
Check to see if the handset battery pack is connected inside
the handset battery compartment.
•
Make sure that the adaptor plug is connected to the base unit.
•
Check for the telephone line cord connections. Ensure that
both connectors are plugged securely on the jacks.
•
Test the phone at a different telephone wall jack and listen for a dial tone.
•
Test a different phone in the wall jack and listen for a dial tone.
Will not
ring
•
The phone or another phone connected to the same line may
be in the off-hook (IN USE) position.
•
Try a different phone, if the problem still exists, the fault is not with the unit.
Static
•
The rechargeable battery pack might be weak. Allow the rechargeable
battery pack to charge fully before using.
•
Try a different phone, if the problem still exists, the fault is not with the unit.
•
Some atmospheric conditions such as very low humidity can cause
static build-up.
Cannot
dial out
•
Press the TALK button on the handset and listen for a dial tone before
dialing out.
•
Are you in a rotary only area? Set the TONE/PULSE switch to PULSE.
•
Try a different phone in the jack. If the problem persists, the fault is not
in the unit.
•
Is the phone connected to an answering machine? Disconnect the
answering machine and try to have the phone plugged into the jack
alone. If it works alone, there is a compatibility problem. Purchase
a 2 for 1 adaptor at any phone or electrical supply store. Plug the
2 for 1 adaptor into the modular wall jack, and then plug the phone
into one side and the answering machine on the other side of the adaptor.
Memory
feature
does not
work
•
Make sure that the unit is in the standby mode before storing a phon
number.
•
The maximum number of digits that you can store for each memory
location is 32 digits. See the “Memory Dialing” section for more details.
No link
between
the base
and
handset
•
You may have taken the handset at a distance away from the base
that is beyond its normal operating range. Refer to the section of
“Operating Range” in the manual for more details.
!
!
!
!
!
!
!
Operating Manual
!
!
!
!
!
!
!
!
!
!
!
!
!
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!
CLT-777
Cordless Caller ID Phone
!
BLUEsky
!
!
!
AC ADAPTOR: USE ONLY WITH CLASS 2 POWER SOURCE, RATED
OUTPUT 6VDC, 200mA.
THIS SYMBOL IS INTENDED TO ALERT THE USER OF THE
PRESENCE OF IMPORTANT OPERATING AND MAINTENANCE
(SERVICING) INSTRUCTIONS IN THE OWNER’S MANUAL.
