Blueshape PWS-RUGGED MINI, Руководство по эксплуатации, Страница: 9 / 16

9
Interpretation of the LED display
Two arrays of 3 LEDs each are used to indicate the level of current
delivered instantaneously by each battery, giving the user the
indication of the load each battery is withstanding:
-
2 green LEDs (L1, L2)
- 1 red LED (L3).
The amount of current a channel is conducting is shown as a
percentage in proportion to the maximum permissable current for
that channel. The maximum current draw from each battery is 12A,
resulting in a typical maximum output current / channel of 6A.
The LED gauge shows the display of the current draw of each
battery according to the table below:
Current Output (mA)
LED 1
(green)
LED 2
(green)
LED 3
(red)
0 - 1500 Blink - -
1500 - 3000 Full - -
3000 - 4500
Full Blink -
4500 - 6000 Full Full -
6000 – 9000 Full Full Blink
9000 - 12000 Full Full Full
Note:
If the batteries in use are able to communicate with the PWS2, the
real current value is read directly from the battery.
If the batteries in use are not able to communicate with the PWS2,
an indication corresponding to the analogue value of the current is
displayed.