CDT- 45
Single channel portable charger
Instruction Manual
Rev 1.0
www.blueshape.net
The user is being alerted of the importance of going through the literature accompanying this product and getting
familiarised with the important safety and operating instructions included.
Please follow the safety instructions below and keep them handy for quick reference:
Protect the equipment from humid environments. Avoid any contact with water or other fluids. Do not use if any liquid has been
accidentally spilled over the equipment.
Avoid touching the D-TAP terminals.
Unplug when not in use and avoid power surges or unstable AC sources.
Avoid setting up near heat sources such as fireplaces, radiators, stoves or other heat generating equipment.
To prolong lifetime, avoid usage in overheated environments.
Use only, to charge BLUESHAPE or third party V-lock batteries or 3-Stud batteries with charge enabled D-TAPs.
Contact qualified service personnel for inspection or repair.
Do not remove cover or dismantle the charger. There are no user-serviceable parts inside.
Note:
The equipment may become rather hot during operation. This is not a sign of malfunction. This is to be expected due to the
high power handling of the device in such a small volume.
Features
Perfect for transportability and for having a readily
available charging means at any time and place
whenever needed
Charging unit with constant current and constant
voltage charging profile
Pre-charge feature for deeply discharged battery
protection included in the charger operation
Rapid time to charge. A BLUESHAPE BV100HD can
be fully charged within 120 minutes.
Short circuit and overload internal protection
Lightweight
and
compact
Note:
This equipment is not an intelligent charger and does not communicate
with BLUESHAPE BSCVMON software
Main specifications
Input Voltage
100 - 240V AC, 50-60Hz [120VA]
Charge indication
Single LED display system
Output Voltage
DC 16.8V (+/- 0.8%) -
Output Current
Max 4.5A in CC
Operating Temp.
5°C + 45°C
Dimensions
60 x 132 x31mm (2.36" x 5.2" x 1.22")
Introduction
The CDT-45 has been designed as a handy, economical,
portable charger to charge those batteries that have charge
enabled D-TAP sockets.
It is safe, compact, light and stand-alone and can easily be
taken anywhere without much inconvenience. Nevertheless,
It still features quick charging capability @ 4.5A in constant
current mode. Pre-charge feature is also supported.
D-TAP charging facilities in Blueshape batteries are as
follows:
Pre-Granite series - not available
Granite (one) series - not available
Granite Two, V-lock / 3-stud - available (the charge enabled
input is the one with the D-Tap cover, the same colour of the
gasket (blue or red depending on battery model)
Granite Mini series, V-lock or 3-stud - available through both
D-TAP sockets
Weight
0.3Kg (0.67lbs)
