BlueSens BlueVary, Обновление руководства

Страница: 5 / 31

BlueVary UPDATING MANUAL
Rev 200504 002 4
EN
2 For your safety
General information 2.1
The
BlueVary was programmed with the latest firmware version when it left our plant.
Please read this manual carefully before updating the firmware. The manual contains safety instructions
that must be observed to ensure safe operation.
The device may never be operated in conditions that do not correspond to the specifications on the
specification plate.
Maintenance and servicing may only be performed by specially trained personnel who are familiar with
the hazards inherent to the work as well as the guarantee terms.
Authorized personnel 2.2
All actions described in this manual may only be conducted by specialist personnel who have been
authorized by the plant operator. Work on the device other than that described in this manual and the
operation manual may only be performed by personnel of the BlueSens gas sensor GmbH company for
safety reasons and to ensure compliance with the terms of the guarantee.
Proper use 2.3
The
BlueVary is a gas sensor for measuring gas concentrations for the specified gases in the specified
concentration area under the conditions described in the technical data. It is used to monitor metabolism
in biological processes such as fermentation.
Misuse warning 2.4
The
BlueVary may not be used as a safety component for monitoring gases in systems or be used as a
gas warning device.
General safety instructions 2.5
If the device is not used correctly, or used for its intended purpose, application-specific hazards may
arise.
Danger!
If the device is incorrectly installed or set, there is a danger of explosions and poisoning.
After installation, check all connections for leaks.

Note! Please note the safety instructions in all the following chapters,
especially in the chapters 3 and 4 of the user manual.