background image

MULTIFUNCTION TOUCHPAD

Answering/Ending/Rejecting/Redialing/Transferring calls;

Playing/Pausing the Music; Factory Reset; Pairing.

MAKING CALLS

Once Libre are successfully connected to your mobile phone, you can use them

to make and receive calls. Please consult your mobile phone’s manual for more

information.

1. Dial By The Phone Keys

Enter and dial the number on your mobile phone as you normally do. Once the

call has been set up, the sound will be transmitted to your Libre automatically.

2. Redial

Double tap the Touchpad to redial the last number you called.

NOTE:

During the phone mode & use the Libre in pair, only the left channel earbud 

will be activated for handsfree. The right channel only supports music function.

ANSWERING/ENDING/REJECTING CALLS

When Libre are turned on, and there is an incoming call, you will hear a musical

tone.

- Single tap the Trouchpad to answer the call.

- Single tap the Touchpad to end the call.

- Tap and hold the Touchpad for 3 seconds to reject the call.

TRANSFERRING CALLS

During both incoming and outgoing calls, you can double tap the Touchpad to 

transfer to call to the mobile phone. If you want to transfer the call back to 

Libre, double tap the Touchpad again. More procedure may be involved for 

some mobile phones.

ADJUSTING THE VOLUME

To make the Libre small and lightweight, we removed the colume control

from the earbuds. Increase or decrease volume by using the colume buttons 

on your mobile phone or other Bluetooth device.

Содержание Libre






















Отзывы: