background image

To prevent possible damage to the ears, pressing the  or volume – button increases 
or decreases the earphone volume one step at a time.

 

Pairing your wireless earbuds with a cell phone:

 

1. With the wireless earbuds turned off, press and hold the MFB key until the red and blue 
lights flash alternately (takes about 6 seconds). You will also get a voice message, “Pairing 
state” in the earphone. This state allows the headset to be paired to another Bluetooth® 
device.

 

 2. Turn on the cell phone and select the Bluetooth® option.

 

 3. When the wireless earbuds model name appears " BPHONIC" on the cell phone screen, 
tap to accept.

 

 4. If a password is requested, use ‘0000’.

 

5. When pairing has been successful, the wireless earbuds will flash a blue light.

 

Note:

 

 If no connection is established within 2 minutes, the unit will switch off.

 

 

Pairing to a second cell phone:

 

1. Follow the above steps to pair to cell phone #1.

 

 2. Turn off the Bluetooth® option on cell phone #1

 

 3. Press and hold the MFB key on the headset until the red light flashes and the headset 
turns off 

 

4. Repeat the pairing process as above, but this time using cell phone #2

 

 5. Once the second pairing has been successful, turn cell phone #1 on again 

 

6. Select the Bluetooth® option, and find and select the headset model number.

 

 7. Tap to confirm. Both cell phones are now paired to the wireless earbuds.

 

Notes:

 

·Pairing will only work properly when earphone and cell phone are within 10 meters of each 
other. Beyond this distance, sound quality will be reduced or the pairing may not operate. 
·Large objects blocking the direct line between units, may cause pairing fail.

 

 ·The earphone will automatically attempt to pair with the cell phone following a temporary 
disconnection. 

 

·The connection may also be re-established by pressing the MFB key once, or through the 
cell phone’s Bluetooth® option.

 

Connecting your headset to a computer:

 

You can use the wireless earbuds to listen to music or chat on the computer. Computers 
using other than Windows XP operating system may need a software IVT adapter before 

Содержание Audiobeat






Отзывы: