VXi BlueParrott
®
Point
TM
User Guide
PAGE 17
ADVANCED FEATURES AND FUNCTIONS
(continued)
Resetting Headset’s Paired Devices List
This will reset or clear the headset’s internal paired devices list. The headset must be on to perform
this function.
1. Power on the headset. It does not matter if it connects to any devices.
2. Hold the headset near your ear and press and hold the Volume Up and the Volume Down buttons
together
for approximately 6-10 seconds until two low tones are heard. The LED will flash red two
times, then the headset will automatically go into Pairing Mode.
3. If you are not ready to pair the headset with a device, power it off. The pairing memory is now clear
and will need to be paired to any desired devices before it can be used with them.
VXi BlueParrott
®
Point
TM
User Guide
PAGE 18
FUNCTIONS & INDICATORS TABLES
Standby Mode Functions
Function
Button/Duration
of Press
LED Indicator
Audio Indicator
Voice Indicator
Power On
Slide switch towards
boom
3 fast blue flashes
NONE
“Power on”
Power Off
Slide switch towards
tail
4 fast red flashes
NONE
“Power off”
Enable Pairing Mode MFB (5-6 seconds)
Alternating red and
blue flash
NONE
“Discovering”
Volume Up
Volume Up
(quick press)
NONE
1 short tone
NONE
Volume Down
Volume Down
(quick press)
NONE
1 short tone
NONE
Phone Voice Control
(Start/End)
MFB (quick press)
NONE
1 tone
NONE
Last Number Redial Volume Down
(1-2 seconds)
NONE
1 short tone
NONE
Disable LEDs
Volume Up/Volume
Down (quick press)
NONE
1 short tone
NONE
Enable LEDs
Volume Up/Volume
Down (quick press)
LEDs active
1 short tone
NONE
VoIPon www.voipon.co.uk [email protected] Tel: (0)330 088 0195 Fax: +44 (0)1245 808299
