BlueParrott B550-XT User Manual
PAGE 16
Reset Headset Paired Devices List
This will reset, or clear the headset’s internal paired devices list . The headset
must be on to perform this function .
1 . Power on the headset . It does not matter if it connects to any devices .
2 . Hold the headset near your ear and press and hold the Volume Up and the
Volume Down buttons together for approximately 6-10 seconds until two low
tones and/or the “Pair mode” voice prompt are heard .
3 . Power off the headset . The pairing memory is now clear and will need to be
paired to any desired devices before it can be used with them .
Reset Parrott Button Defaults
This will reset or clear the headset’s internal paired devices list and will also
restore the Parrott Button’s factory defaults (voice command and mute) . The
headset must be on to perform this function .
1 . Power on the headset . It does not matter if it connects to any devices .
2 . Press and hold the Parrott Button and the Volume Down buttons together for
approximately 6-10 seconds until you see two quick purple flashes on the MFB .
3 . The headset Parrott Button is reset, the pairing memory is now clear and the
unit will power off .The headset will re-enter pairing mode .
4 . Follow the pairing process to re-pair the headset to your cell phone/device .
Updating and Configuring
To update the the headset firmware or change configuration settings and certain
Parrott Button options, download the BlueParrott Updater software from
blueparrott.com/software/blueparrott-updater
ADVANCED FEATURES AND FUNCTIONS
(continued)
