PALM GARDEN ENTERPRISES CORP.
Copyright © 2005. All rights reserved
5
Responding to Cell Phone
1. Setting Up
Before you turn on the receiver, please use the charging cable to charge
them.
2. Pairing
(1) Turn on the Bluetooth enabled cell phone.
(2) Turn on the receiver.
(3) Operate the Bluetooth enabled cell phone to search the receiver.
*Note: Users need to keep the two devices between 2 meters in case of
connection failure. The status LED indicator of the receiver will be
constantly on during search.
(4) Enter PIN code “0000” when the pop-up screen is shown on the cell
phone.
(5) Pairing is done while the status LED indicator start flashing.
3.Connecting
(1) ”Pairing” creates a link between Bluetooth enabled cell phone and
Bluetooth receiver. It allows the phone to remember the receiver’s unique
Bluetooth ID. You could add it to a list of “Paired Device” in the phone.
(2) The receiver only needs to be paired ONE time with the phone before
use.
(3) Once the receiver is paired, it can be easily connected to the phone.
(4) If the pairing information or log were deleted from the phone, the receiver
must be paired with the phone again.
(5) Start to use the Bluetooth receiver to pick up / drop calls in a wireless
mode.
*Note:
1. Some cell phones require that an explicit connection be established with
the receiver. For example, Nokia 3650 requires a Bluetooth connection to
the receiver be initiated and stay connected before proceeding further.
Other phones may initiate a Bluetooth connection only when a call is
received. Please refer to the user manual of the cell phone being used and
fully understand its behavior.
