2.3 Equipment Interface Instruction
This section details the front and back panel of the interface functions.
I
e
c
a
f
r
e
t
n
I
t
n
o
r
F
t
c
u
d
o
r
P
Power Switch
Power Switch: to turn ON/OFF the whole battery BMS standby, no power output.
RUN
ADD Switch (5)
Console
ON/OFF
ON/OFF light: green LED lighting to show the Power Switch is ON, and the BMS has
electricity (No power).
RUN light: green LED flashing to show the battery is running.
ADD Switch: 4 ADD switches, to definite different baud rate.
Nether position is OFF, means “0”. Upper position is ON, means
“1”. “0000” setup the baud rate 115200, and “1000” setup the
baud rate 9600.
Console Communication Terminal: (RJ11 port) follow RS232 protocol, for manufacturer or
professional engineer to debug or service.
SOC light: green LEDs to show the battery’s current capacity.
Alarm
Alarm light: red LED flashing to show the battery has alarm, and lighting to show the battery
is under protection.
Start Button: press more than 0.5s to start the battery module, Power output ready.
SOC
Start
On
Off
energía indoor
www.Latpower.com