Bluefish444 Epoch 2K Horizon, Руководство пользователя

Страница: 12 / 19

Create Range Windows User Manual
12
Installation
1. Prepare your system.
2. Install 3rd party applications.
3. Install QuickTime version 7.4.5 or above
4. Bluefish444 card installation - hardware
5. Bluefish444 software installation
6. 3rd party software setup (such as Adobe CS5 )
1. Prepare your system
Ensure you have installed the latest BIOS, operating system, OS updates and drivers for your
system.
Please refer to the certified hardware guide section or the readme document for more
information.
http://www.bluefish444.com/support/compatibility/hardware/
2. Install 3rd party applications
Supported 3rd party applications must be pre-install before running Bluefish444 installer.
Supported applications installed after Bluefish444 software installation, will require re-installing
Bluefish444 installer again.
3. Install the latest QuickTime player
Download and install the latest QuickTime installer available at the following site.
http://www.apple.com/quicktime/download/
4. Bluefish444 card installation – hardware
Place your system in an easily accessible position with sufficient lighting. It is not recommend
inserting the card in an awkward position that will increase the chances of a poorly contacted or
incorrectly installed card.
Ensure your hands are clean and free of dirt and fluid.
Make sure you are earthed and discharge any static build up before handling the Bluefish444 by
touching the metal frame of the PC case.
Do not touch the components on the PCB and do not touch the PCI slot mating edge.

Remove your systems protective case.

Remove the power cable from your system (!!!)

Identify a free PCI-E slot (check your hardware configuration or contact your hardware
supplier)

Hold the card by the top of the PCI shield and at the top of the PCB at the opposite end of
the PCI shield (this will reduce any chance of damage to the bluefish444 card circuitry).

Insert the card into the correctly chosen slot by firmly pressing down on the metal PCI
shield and the edge of the PCB.

Secure the card with a screw or PCI clip (depending on the chassis).

Replace the system chassis cover and connect the power to your system.