Bluefin LED GW16IFM, Руководство по установке

Страница: 5 / 8

5
Specs: electrical/fuse ratings
Voltage Current Fuse rating
LM48CC Drivers 24V only 24V-6.5 8amp
Warnings:

Do not attempt to install the lights whilst the boat is in the water.

Ensure that the correct voltage is used for the light and Driver.

Ensure that an in line fuse is installed with the correct fuse rating per the Driver installed.

Ensure all connections are made water tight.

If you wish to connect your Colour change lights and drivers to your own DMX Controller
please contact BluefinLED beforehand for further advise.
Installation:
Electrical connection:

Only attach the driver power cable to a waterproof connection or junction box, the cable
must have a watertight connection otherwise your warranty could be void.

Attach the Driver power cable to the VDC power on the boat ensuring that you use the in line
fuse supplied connected to the positive(red) wire, ensure that you use the heatshrink
provided to create a water tight fit into the fuse holder. (see fig 2)

Plug the Light cable connector to driver as per Fig 1 aligning the white lines on the
connectors to ensure the connector pushes home correctly.

Plug the DMX controller cable (if supplied fig 3) into the first driver DMX IN connector as per
Fig 1.

Plug the DMX Interlink cable (Fig 4) into the DMX OUT connector on the first driver Fig 1.

You can now daisy chain the drivers using the DMX Interlink cables going from the OUT DMX
to the IN DMX on the next driver.

When completing a circuit you must plug the DMX Terminator plug (Fig 5) into the last
drivers DMX OUT to complete the circuit.
Fig 1 (Driver)
Fig 2 (Fuse connection)
Fuse holder
Light cable connector
24VDC Power cable
DMX IN Connector
DMX OUT Connector