2
Strap the Dock light puck to the dock or piling using an appropriate strap or wire to hold the dock
light in position securely, please ensure that you do not modify the light to achieve this and use wire
or straps that will fit the slot size on the Dock light puck.
For both Option 1 and 2
Cut the tubing to the required length ensuring that the Moisture guard will be inside the tube.
Thread the cable through the tubing.
Fig 5
Connect the tubing to the Puck tube clamp and clip in place.
Fig 6/7/8
Fix tube clamps in appropriate places to hold the tube in place, you can turn the Tube in many
different angles to provide the acquired routing for the tube.
Fig
9/10/11/13
Protective Tubing
The cable of the light must be protected by the tubing supplied as the harsh water environment
will erode the cable and damage will occur.
Electrical connection:
You will notice an inline HYDRO LOCK attached to your cable (Fig 1). If this is removed your
warranty will be void.
If you have purchased a dock light kit please refer to the power supply box manual for the next step.
If you have purchased the light as a single light please refer to the junction box manual for the next
step.
Fig 1
Fig 2
Fig 3
Mounting Screw
holes for
mounting with the
2 screws provided.
Strap/wire
mounting slot
Drill 3mm hole for
mounting Screws
both sides.
Содержание DL6D
Страница 8: ...8...
